Lacquered, Painted & Primed MDF
- Roller, spray & curtain coating processes
- Options at relatively low quantity
- Paint, lacquer or primer coating
- Multiple core material types
- Most common sizes: 2440x1220mm & 3050x1220mm
- Special sizes up to 3660x1830mm (longer possible subject to quantity)
Overview
Many different types of MDF boards can be supplied (i.e. standard, moisture resistant, fire resistant, exterior) in a variety of painted & lacquered finishes to match your required colour. (This surface finish can be roller applied, sprayed, or curtain coated).
We can offer a paint match to any colour you desire, and the normal approach is to quote a reference from a standard colour system such as RAL Classic, BS 4800, BS 381, NCS, Pantone, where one or both sides can be specified as painted.
MDF of any kind can also be supplied with faces painted to match to an existing colour that is not already detailed within a particular matching system, providing you can supply a sample of what is required.
MDF can be also used as the core of a veneered product finished as shown on our specialist timber cladding & components page, and we are potentially able to match to an existing colour that is not already detailed within a particular matching system, providing you can supply a sample of what is required.
Typical core options
Winwood Products is a supplier of prefinished plywood offering the following configurations/options:
- Through-Coloured MDF
- Standard
- Moisture resistant
- Fire resistant
- NAF (No-added formaldehyde)
- Exterior
- Tricoya
- Cut to size and/or special profile/shape prior to (or after) painting
Colour systems
- RAL Classic
- BS 4800
- BS 381
- NCS (*)
- Pantone (*)
- Farrow & Ball (*)
- Can also be supplied to match a particular sample supplied by you
- Also available as painted plywood
(*) opens in new window
Technical details
- Thickness:
- 2-50mm - thicker as a composite up to max 100mm
- Standard sizes:
- Typically 2440x1220mm, 2440x1525mm, 2440x1830mm, 3050x1220mm, 3050x1525mm
- Special sizes:
- Other sizes available, subject to agreement up to maximum 3660x1830mm (longer possible subject to quantity)
- Tolerances:
- As per EN 622
- Finish types:
- 'Dead Matt' (<5% sheen)
- Matt (5-10% sheen)
- Satin (20-40% sheen)
- Gloss (50-70% sheen)
- High Gloss (>70%-90% sheen - typically achieved by burnishing)
- Coating processes:
- Roller/brush applied
- Sprayed
- Curtain coated