Go to navigation links
Solid timber panels

Acacia Edge Glued Panels & Worktops

Acacia panel (1-layer full length staves)
  • 18mm to 45mm thick - others by arrangement (composites up to 100mm)
  • Maximum size 5300x1210mm
  • Non-stock items typically available to special order within 2-3 weeks
  • Pallets (20) / mini-bundles (10) / some minimum 5 per item
  • Supplied unfinished or with various coatings such as clear lacquer, oils, etc.
  • D3 bonded for limited high moisture conditions

Overview

Acacia is a distinctive tree widely distributed in south eastern Australia & Tasmania, and has been more valued for horticultural uses than for its timber in the past.

Acacia wood ranges from very pale pink/yellow through to a light honey colour, and light silver bands sometimes appear in the grain, darkening to a red/honey colour when finished. Depending on the cut of the lumber these bands can provide an attractive and marked feature, while steaming the wood causes it to turn a dark chocolate colour.

The grain is usually straight but sometimes interlocked, with an even texture. Acacia wood is fairly tough and when planed and dressed it produces a very smooth surface for furniture and polishes well, and these tones mean it is in increasing demand for furniture designers and manufacturers.

Solid acacia panels are regularly used as acacia worktops, and in the manufacture of all types of furniture.

Panel Types

Winwood Products is a supplier of acacia panels & worktops offering the following configurations/options:

Acacia - Finger jointed panels & worktops

(Click heading or image for full details of thicknesses & panel sizes)

acacia fingerjointed worktops
  • Special order in pallet quantities
  • 18mm to 60mm thick
  • Any size up to max. 5300x1210mm
  • D3 water resistant bonding
  • Calibrated to 80 grit as standard
  • Faces protected with shrinkwrapping

Specially ordered in pallets of 20 per item, finger jointed acacia panels are constructed from full thickness, finger jointed strips of acacia. The strips are 28-45mm wide (usually 40mm) x 250-600mm long.

This product is also available constructed from 20mm wide staves in 20mm, 25mm, 30mm & 40mm thickness.

Can be supplied cut or machined to pattern, and prefinished with lacquer, oil, wax or special finishes

Information

Technical details (general)

  • Special sizes:
    • In principle, any size can be produced up to the maximum stated above
  • Tolerances:
    • Length/width: typically +5mm/-3mm
    • Thickness: typically ±0.2mm
    • (Others by arrangement)
  • Face grades:
    • A/B, others by arrangement
  • Bonding Quality:
    • D3 - High moisture applications
  • Other features:
    • Other woods can be incorporated into the construction of the panel to achieve a decorative or contrasting effect