Go to navigation links
Solid timber panels

Acacia - Full Length Stave Panels & Worktops

Acacia panel (1-layer full length staves)
  • Special order item
  • 19mm-45mm (composites up to 100mm)
  • Maximum size 2500x1210mm
  • Typical pallet size = 10 sheets per item
  • Supplied raw or coated with various coatings such as clear lacquer or oil
  • B3 bonded for high moisture conditions


Winwood Products is a supplier of the following acacia full length stave panels & worktops:

Full length acacia panel

Specially ordered in minimum quantity of full pallets per item, these products are constructed from full thickness, full length strips of acacia. The strips are random width of 40-90mm wide, with each panel made from a single width of strip.

The staves making up the panel are bonded together with B3 water resistant glue, calibrated to 80 grit and the faces protected with shrinkwrapping before packaging on a pallet for shipping

The panel can be supplied as produced, or cut or machined to pattern. They can also be supplied prefinished with lacquer, oil, wax or special finishes as required.

Please click on the main Acacia page for details of the wood


Technical details (general)

  • Construction:
    • Full thickness, full length acacia staves of random width (40-90mm wide) - single width within each panel
  • Standard thickness:
    • 19mm, 25mm, 40mm, 45mm
  • Standard sizes:
    • 19mm / 25mm / 40mm:
      800x / 1300x / 1500x / 1800x / 2000x / 2200x / 2500x1210mm
    • 40mm & 45mm also available in:
      900mm-2100mm x 650mm
  • Special sizes:
    • In principle, any size can be produced up to the maximum stated above
  • Standard Finish:
    • Calibrated with 80 grit
  • Packaging:
    • Faces protected with shrinkwrapping
  • Tolerances:
    • Length/width: up to 1m @ ±1mm, up to 2m @ ±2mm , 2m & above @ ±3mm
    • Thickness: +0.2mm, -0.5mm
    • (Others by arrangement)
  • Face grades:
    • A/B
    • Other grading by arrangement
  • Bonding Quality:
    • B3 - High moisture applications
  • Other features:
    • Other woods can be incorporated into the construction of the panel to achieve a decorative or contrasting effect