Go to navigation links
Solid timber panels

American Walnut - Full Length Stave Panels & Worktops

American Walnut panel (1-layer full length staves)
  • Special order item
  • 19mm-40mm (composites up to 100mm)
  • Maximum size 3000x1210mm
  • Typical pallet size = 10 sheets per item
  • Supplied raw or coated with various coatings such as clear lacquer or oil
  • B3 bonded for high moisture conditions

Overview

Winwood Products is a supplier of the following American walnut full length stave panels & worktops:

Full length american-walnut panel

Specially ordered in minimum quantity of full pallets per item, these products are constructed from full thickness, full length strips of American walnut. The strips are random width of 40-90mm wide, with each panel made from a single width of strip.

The staves making up the panel are bonded together with B3 water resistant glue, calibrated to 80 grit and the faces protected with shrinkwrapping before packaging on a pallet for shipping

The panel can be supplied as produced, or cut or machined to pattern. They can also be supplied prefinished with lacquer, oil, wax or special finishes as required.

Please click on the main American Walnut page for details of the wood

Information

Technical details (general)

  • Construction:
    • Full thickness, full length American walnut staves of random width (40-90mm wide) - single width within each panel
  • Standard thickness:
    • 19mm, 25mm, 40mm, 45mm
  • Standard sizes:
    • 800x / 1300x / 1500x / 1800x / 2000x / 2200x / 2500 / 2700x / 3000x1210mm
  • Special sizes:
    • In principle, any size can be produced up to the maximum stated above
  • Standard Finish:
    • Calibrated with 80 grit
  • Packaging:
    • Faces protected with shrinkwrapping
  • Tolerances:
    • Length/width: up to 1m @ ±1mm, up to 2m @ ±2mm , 2m & above @ ±3mm
    • Thickness: +0.2mm, -0.5mm
    • (Others by arrangement)
  • Face grades:
    • A/B
    • Other grading by arrangement
  • Bonding Quality:
    • B3 - High moisture applications
  • Other features:
    • Other woods can be incorporated into the construction of the panel to achieve a decorative or contrasting effect