Polypropylene Faced Plywoods
This is a laminated plywood that is constructed using a strong birch plywood core, with a multilayer polypropylene
coating & lacquer bonded to it using elastic two component glue (meeting EN 204 D4 for exterior applications).
This hard-wearing laminate coating is available in a range of colours and designs and is UV resistant for good
colour fastness (rated 6-7 according to DIN 54004).
Any combination of the following RAL Classic colours and one patterned effect can be supplied as the surface laminate.
Plywood of this type is usually described as the following examples:
'RAL 3011/RAL 3011' would have RAL 3011 covering to both sides, while
'RAL 7001/RAL 9003' would have RAL 7001 on one side and RAL 9003 on the other
NB: RAL 9010 Traffic White is only available on both sides only
Standard range of coverings:
RAL 3011
Brown red
RAL 5003
Sapphire blue
RAL 6005
Moss green
RAL 7001
Silver grey
RAL 8016
Mahogany brown
RAL 8019
Grey brown
RAL 9002
Grey white
(unlacquered)
RAL 9003
Signal white
RAL 9004
Signal black
RAL 9022
Pearl light grey
Speckled
Available on both sides only:
RAL 9010 - 2 sides
Traffic White
(unlacquered)
Dimensions:
- Thickness from 4mm up to 30mm
- Standard sizes of 1500/1525mm x 2400/2440/3000/3050/3600/3660mm
- 1220mm width also available, subject to confirmation
Advantages:
- Tough and elastic
- Taint and odour free
- Environmentally friendly (does not include chlorine derivatives)
- Suitable for both interior and exterior applications
Typical applications :
- Furniture manufacture
- Kitchens, offices, shops, bathrooms & exhibitions
- Garden and playground fittings
- Sports halls
- Horse trailers and vehicle sidewalls
- Flight cases
